Common uses: Sturdy, flat surfaces that Post can be bolted through, Roll Bars, Trailer Hitches (w/O Ball); Serves as "utility" mount. provides the universal "Post" portion of our mounts to enable customized mounting.
Dimensions: 3.125" H x 1.74 Outside Dia.
Contents: - 1 Post Mount w Plastic Cap; Note: You will need to secure a bolt, nut, and washers based on your needs.
1. SELECT LOCATION; DETERMINE BOLT LENGTH.
Using the post mount as a template, pencil the hole location onto the
mounting substrate. Drill hole with 3/8" drill bit. If hole already exists, align
post mount with hole. Note you can install the mount through a larger hole
than 3/8", Just be sure the washer you use is larger than the hole. Measure
required bolt length and purchase a stainless steel 3/8" bolt of appropriate
length, 2 washers and nut.
2. INSTALL MOUNT.
With a rachet and pliers place bolt with washer through the inside hole of
the post mount and connect nut on opposite side (ad washer first). Securely
tighten the nut. Place black plastic cap over the open end of the mount and
push down until top of cap touches the top of the post mount.
3. INSTALL MANTIS
Now place the Mantis assembly onto the vertical post of the
bracket, and lock in place.